4.5 out of 5
Dayton Audio DAEX19CT-4 Coin Type 19mm Vented Exciter 5W 4 Ohm
* Click "Add to Cart" to calculate shipping and delivery time.
Pricing Note
Product Description
Manufacturer Part Number: DAEX19CT-4
Take your product or project to the next level by turning it into a speaker! The DAEX19CT-4 sound exciter, by Dayton Audio, features voice coil vent holes for higher power handling
Key Features:
Dayton Audio DAEX19CT-4 Coin Type 19mm Vented Exciter 5W 4 Ohm
Dayton Audio's 19 mm DAEX19CT-4 coin type exciter features the same ability to turn nearly any surface into a speaker, as other exciters and tactile transducers, only in a more compact package for working with smaller surfaces. This exciter's small size enables audio reproduction in places never imagined: toys, monitors, cabinet doors... even windows!
A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. Cooling holes placed strategically on this exciter's housing allows for higher power handling, for applications where more output is desired, while maintaining a small form factor.
To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied... just peel and stick! Two PCB solder points keep installation and wiring as compact as possible.
Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound.
Specifications: Power handling: 5 watts RMS VCdia: 19 mm Nominal impedance: 4 ohms Re: 3.8 ohms Le: 0.04 mH Fs: 637 Hz Dimensions: 1.3" (33 mm) dia. x 0.51" (13 mm) H Adhesive dimensions: 0.85" (21.5 mm) outside diameter, 0.63" (21.75 mm) inside diameter Weight: 31.5 grams.
To learn more about Dayton Audio Exciters, and for help on which Exciter is right for you, check out .
Take your product or project to the next level by turning it into a speaker! The DAEX19CT-4 sound exciter, by Dayton Audio, features voice coil vent holes for higher power handling
Key Features:
- Small size; just under 1-1/2" diameter, about 1/2" high
- Pre-applied 3M™ VHB™ adhesive for quick, durable installation
- Rare-earth neodymium motor with cooling vents for higher power handling
- 4-ohm impedance for use with small, Class D amplifiers
- Strategically-placed vent holes cool this exciter's voice coil for higher power handling
Dayton Audio DAEX19CT-4 Coin Type 19mm Vented Exciter 5W 4 Ohm
Dayton Audio's 19 mm DAEX19CT-4 coin type exciter features the same ability to turn nearly any surface into a speaker, as other exciters and tactile transducers, only in a more compact package for working with smaller surfaces. This exciter's small size enables audio reproduction in places never imagined: toys, monitors, cabinet doors... even windows!
A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. Cooling holes placed strategically on this exciter's housing allows for higher power handling, for applications where more output is desired, while maintaining a small form factor.
To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied... just peel and stick! Two PCB solder points keep installation and wiring as compact as possible.
Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound.
Specifications: Power handling: 5 watts RMS VCdia: 19 mm Nominal impedance: 4 ohms Re: 3.8 ohms Le: 0.04 mH Fs: 637 Hz Dimensions: 1.3" (33 mm) dia. x 0.51" (13 mm) H Adhesive dimensions: 0.85" (21.5 mm) outside diameter, 0.63" (21.75 mm) inside diameter Weight: 31.5 grams.
To learn more about Dayton Audio Exciters, and for help on which Exciter is right for you, check out .
Product Details | |
|---|---|
| Brand | Dayton Audio |
| Model | DAEX19CT-4 |
| Part Number | 295-218 |
| UPC | 848791000966 |
| Unit of Measure | Each |
| Weight | 0.05 |
Product Specifications | |
|---|---|
| Application | Full-Range Exciter |
| Power Handling (RMS) | 5 Watts |
| Impedance | 4Ω |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category
Customer Reviews
By Fish Fool
Date: September 15, 2021
Using them on my sim racer. Mounted them to the base of the foot pedal plate, and turns them into speakers.
Rating: 
[4 of 5 Stars!]
[4 of 5 Stars!]
By John wayne
Date: May 26, 2020
Very nice product, makes a speaker out of any object
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
Items 1 - 2 of 2 reviews
1