The BBDS1 is a network fish finder for NavNet 3D and NavNet TZtouch that features an updated bottom discrimination function, as well as the FDF (Furuno Digital Filter) capability of the DFF1. The BBDS1 determines the bottom structure and separates them into the following categories: mud, sand, gravel, and rock. This is achieved by analyzing echo characteristics from the bottom components such as particle size and hardness.
Connect the BBDS1 to your NavNet 3D or NavNet TZtouch network and get ready for your NavNet system to provide you with valuable information to locate rich fishing grounds, boosting your catch.
There are two bottom discrimination display modes to select from, Standard Mode and Probability Mode. In Standard Mode, the most probable materials on the bottom (mud, sand, gravel or rock) are indicated in either graphic mode or a 4-color bar on the bottom of the display.
Because bottom material can change frequently and can sometimes be difficult to identify, Probability Mode shows you what material the bottom has the greatest chance of consisting of by displaying the possible bottom materials proportionally within the 4-color bar.
Frequency: 50/200 kHz alternately transmitted
Output Power: 600 W/1 kW
Power Supply: 12-24 VDC: 1.1-0.4 A (in output power of 1 kW)
Temperature : -15 degree to +55 degree C (in operation)
Relative Humidity: 93% at 40 degreeC
Waterproofing: IP20 (not waterproofed)
Required Conditions for Bottom Discrimination
Detection Range: 5-100M
Boat Speed: 0-10 kn
Transducer mounting: Thru-hull or transom mount only
MFD8/12/BB software: v2.06 or later
The result shown by this function may sometimes be different from the actual bottom components.
For best performance, do not use in-hull mounted transducers with the BBDS1.
The BBDS1 may show an incorrect ground discrimination result, especially when there is a big fish school right under the boat. This is because enough echoes may not be received from the bottom.
Materials such as shell, coral, or a sunken ship are indicated as the most similar material from the four bottom categories:mud, sand, gravel, or rock, according to reflected echoes.
Auto mode is automatically activated when the bottom discrimination function is turned on. (Manual mode is not selectable.)
The BBDS1 is not compatible with NavNet 1 or NavNet vx2.
Appropriate Furuno Transducer recommended for best resuls
Need more information? Our staff are available to answer any questions you may have about this item
6,000 + (and growing) factories in our existing network are eager to make it for you.
When it comes to selling in stock products, we are no difference from many other Internet retailers, but we take pride in going extra miles to do something special for you: Have some products custom made for you.
We cannot do everything, but we usually can accommodate a certain changes in product options such as color, size, material, or minor design twist. We primarily work with vendors or factories, not individual artist or craftsman. For custom made products, we usually only cater to bulk size order that meets the minimum quantity requirement of a single factory run. Don't be shy. Ask. What we can accomplish may surprise you!