5 out of 5
Goldwood GW-6024 6-1/2" Butyl Surround Woofer 4 Ohm
* Click "Add to Shopping List" to save the item for later purchase. You can receive a notice email when it is back in stock.
Pricing Note
Product Description
Manufacturer Part Number: GW-6024
These woofers are ideal for replacing and upgrading old, worn out drivers. They all feature a polypropylene cone, vented pole piece, foam gasket, soft poly dust cap, and stamped steel frame.
Goldwood GW-6024 6-1/2" Butyl Surround Woofer 4 Ohm
Butyl rubber surrounds are superior to foam in two important ways. First, the butyl rubber resists moisture and will not dry rot, providing years of service. Second, the rubber surround, due to its superior damping characteristics will greatly reduce cone break up and ensure low distortion. These woofers are ideal for replacing and upgrading old, worn out drivers. They all feature a polypropylene cone, vented pole piece, foam gasket, soft poly dust cap, and stamped steel frame.
These woofers are ideal for replacing and upgrading old, worn out drivers. They all feature a polypropylene cone, vented pole piece, foam gasket, soft poly dust cap, and stamped steel frame.
Goldwood GW-6024 6-1/2" Butyl Surround Woofer 4 Ohm
Butyl rubber surrounds are superior to foam in two important ways. First, the butyl rubber resists moisture and will not dry rot, providing years of service. Second, the rubber surround, due to its superior damping characteristics will greatly reduce cone break up and ensure low distortion. These woofers are ideal for replacing and upgrading old, worn out drivers. They all feature a polypropylene cone, vented pole piece, foam gasket, soft poly dust cap, and stamped steel frame.
Product Details | |
|---|---|
| Brand | Goldwood |
| Model | GW-6024 |
| Part Number | 290-351 |
| UPC | 643420100273 |
| Unit of Measure | Each |
| Weight | 3.3 |
Product Specifications | |
|---|---|
| Nominal Diameter | 6-1/2" |
| Moving Mass Of Diaphragm (Mmd) | 19.1 |
| Power Handling (RMS) | 90 Watts |
| Power Handling (MAX) | 170 Watts |
| Impedance | 4Ω |
| Frequency Response | 29 to 4,800Hz |
| Sensitivity | 89.5dB 2.83V/1m |
| Voice Coil Diameter | 1.5" |
Thiele-Small Parameters | |
|---|---|
| Resonant Frequency (Fs) | 53.7Hz |
| DC Resistance (Re) | 3.6Ω |
| Voice Coil Inductance (Le) | 0.4mH |
| Mechanical Q (Qms) | 3.05 |
| Electromagnetic Q (Qes) | 0.71 |
| Total Q (Qts) | 0.57 |
| Compliance Equivalent Volume (Vas) | 0.42ft³ |
| Mechanical Compliance of Suspension (Cms) | 0.46mm/N |
| BL Product (BL) | 5.72T·m |
| Maximum Linear Excursion (Xmax) | 2.5mm |
| Surface Area of Cone (Sd) | 136.35cm² |
Materials of Construction | |
|---|---|
| Cone Material | Poly |
| Surround Material | Rubber |
| Basket / Frame Material | Steel |
| Magnet Material | Ferrite |
Mounting Information | |
|---|---|
| Overall Outside Diameter | 6.5" |
| Baffle Cutout Diameter | 5.625" |
| Depth | 3.25" |
| # Mounting Holes | 4 |
Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity suggestion) | |
|---|---|
| Sealed Volume | 0.31ft³ |
| Sealed F3 | 81Hz |
| Vented Volume | 0.84ft³ |
| Vented F3 | 40Hz |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Customer Reviews
By C. Earnshaw
Date: September 11, 2023
Worked great for my automotive installation and I think it's U.S. made. I ended up buying another to install in a second car.
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By David
Date: May 13, 2023
I've been using this woofer as a replacement sub since the original foam surround came apart. My Klipsh 2.1 was purchased back in 2003 and did it's job well for what it is/was. Comparing this woofer with a factory replacement I have to say this one does in fact provide better sound and louder volume though initially it was stiff and required break in time. Just over one year later and it is much better and seemingly a perfect replacement though now I'm using 2 Polk TSi 100's and a Dayton Audio 2.1 channel amp.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Mike
Date: August 01, 2022
These are great, I added them to the front doors of my 2012 Civic along with a Taramps 440 amp, and the bass is incredible. I ordered 2 more to put in the back.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Robert T.
Date: July 04, 2022
I use these for many speaker projects that involve just this woofer and a Peeeless tweeter. I like to cross the tweeter at around 5khz. These woofers are super efficient and reproduce very strong bass down to 40hz and good bass at 30hz. It's the only woofer of this size that I will use. Let me mention that I use a capacitor to hi-pass my tweeter at around 5khz, but do not use a coil to low-pass this woofer. I let it roll of naturally. Sounds great.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Joel M
Date: June 19, 2022
Replaced the front door sub in a 2004 Silverado that was blown. It does the job fine. Might be as good as stock, but I think the other stock speaker carries the bass better. It's fine for a stock replacement.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Josh
Date: May 06, 2022
I powered this sub with a small 2.1 channel amplifier for 20 bucks. It hits hard, great range, clean crisp sound.
Rating: 
[4 of 5 Stars!]
[4 of 5 Stars!]