0 reviews
Be the first to review this item!
Jantzen Audio 1.2mH 14 AWG Copper Foil Wax Coil Crossover Coil
Brand Jantzen Audio
Shop more from PEX
* Click "Add to Shopping List" to save the item for later purchase. You can receive a notice email when it is back in stock.
Pricing Note
Product Description
Manufacturer Part Number: 000-8375
The 99.9998% pure copper foil used in Jantzen Audio's Cross Coil Series inductors is the basis for the Wax Coil. Insulated with 60 micron special-quality paper, the foil is precision-wound tightly and then impregnated with Jantzen Audio's proprietary polymolecular paraffin wax.
Key Features:
Jantzen Audio 1.2mH 14 AWG Copper Foil Wax Coil Crossover Coil
The 99.9998% pure copper foil used in Jantzen Audio's Cross Coil Series inductors is the basis for the Wax Coil. Insulated with 60 micron special-quality paper, the foil is precision-wound tightly and impregnated with Jantzen Audio's proprietary polymolecular paraffin wax. This meticulous process eliminates air bubbles that can occur from the use of conventional materials and methods.
Upon curing, the coil becomes completely dense, solid, and incredibly hard, which eliminates unwanted mechanical resonation and guarantees product consistency. After manufacture each coil is tested individually with an Audiomatica CLIO electro-acoustic measurement system. Jantzen Audio p/n 000-8375.
Specifications: Tolerance: ± 2.0% Inductance: 1.20 mH Wire gauge: 14 AWG DC resistance: 0.293 ohms Dimensions H. x dia. (mm): 83 x 37 Power handling: 350 watts RMS for 16 gauge, 500 watts RMS for 14 gauge and 650 watts RMS for 12 gauge.
The 99.9998% pure copper foil used in Jantzen Audio's Cross Coil Series inductors is the basis for the Wax Coil. Insulated with 60 micron special-quality paper, the foil is precision-wound tightly and then impregnated with Jantzen Audio's proprietary polymolecular paraffin wax.
Key Features:
- Almost perfectly pure copper foil
- Flat cross section increases surface area, improves skin effect characteristics
- Premium paper insulation and proprietary wax for superior results
- Very dense and inert structure avoids mechanical coloration
- Superb product consistency for more accurate filter performance
- High power handling and extreme precision
- Amazing musicality and soundstage
Jantzen Audio 1.2mH 14 AWG Copper Foil Wax Coil Crossover Coil
The 99.9998% pure copper foil used in Jantzen Audio's Cross Coil Series inductors is the basis for the Wax Coil. Insulated with 60 micron special-quality paper, the foil is precision-wound tightly and impregnated with Jantzen Audio's proprietary polymolecular paraffin wax. This meticulous process eliminates air bubbles that can occur from the use of conventional materials and methods.
Upon curing, the coil becomes completely dense, solid, and incredibly hard, which eliminates unwanted mechanical resonation and guarantees product consistency. After manufacture each coil is tested individually with an Audiomatica CLIO electro-acoustic measurement system. Jantzen Audio p/n 000-8375.
Specifications: Tolerance: ± 2.0% Inductance: 1.20 mH Wire gauge: 14 AWG DC resistance: 0.293 ohms Dimensions H. x dia. (mm): 83 x 37 Power handling: 350 watts RMS for 16 gauge, 500 watts RMS for 14 gauge and 650 watts RMS for 12 gauge.
Product Details | |
|---|---|
| Brand | Jantzen Audio |
| Model | 000-8375 |
| Part Number | 255-565 |
| UPC | 844632095337 |
| Unit of Measure | Each |
| Weight | 1.58 |
Product Specifications | |
|---|---|
| DCR | 0.293Ω |
| Inductance | 1.2mH |
| Inductor Type | Copper Foil |
| Wire Gauge | 14 |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category