0 reviews
Be the first to review this item!
Pricing Note
Product Description
Manufacturer Part Number: W5-2053
The 5" W5-2053 subwoofer from Tang Band is built using propietary RBM surround technology for ultra-linear output down to 35 Hz.
Key Features:
Tang Band W5-2053 5" RBM Flat Panel Subwoofer 4 Ohm
This item available through special order only. Minimum order quantity is 50 pieces
Tang Band designed their revolutionary RBM (Real Balanced Mode) flat subwoofers for ultra-linear operation, while remaining as thin as possible. The secret to their low distortion performance is in the patented symmetrical suspension system.
While most subwoofers rely upon a spider/surround combination to keep the cone travel linear, Tang Band has developed a new injection molding process that incorporates front and rear cones, as well as dual opposed surrounds.
Similar to an isobaric subwoofer alignment, the two cones work together to modulate a single column of air, reducing non-linear harmonic distortion. The added mass of the rear cone/surround assembly also reduces free air resonance.
Tang Band's W5-2053 5" RBM mini subwoofer features extensive venting on the rear cone, voice coil former, and back plate to keep the large, overhung, neodymium-powered voice coil cool. A bumped back plate allows for momentary moments of over-excursion without damage. Additionally, it offers low distortion frequency response that reaches down to 35 Hz.
The 5" W5-2053 subwoofer from Tang Band is built using propietary RBM surround technology for ultra-linear output down to 35 Hz.
Key Features:
- Small design for space-limited applications
- Patented dual cone, dual surround subwoofer
- Ultra-linear operation for low non-linear distortion
- Huge 1-1/2" voice coil with 8 mm of Xmax and extensive cooling
- This item available through special order only. Minimum order quantity is 50 pieces
Tang Band W5-2053 5" RBM Flat Panel Subwoofer 4 Ohm
This item available through special order only. Minimum order quantity is 50 pieces
Tang Band designed their revolutionary RBM (Real Balanced Mode) flat subwoofers for ultra-linear operation, while remaining as thin as possible. The secret to their low distortion performance is in the patented symmetrical suspension system.
While most subwoofers rely upon a spider/surround combination to keep the cone travel linear, Tang Band has developed a new injection molding process that incorporates front and rear cones, as well as dual opposed surrounds.
Similar to an isobaric subwoofer alignment, the two cones work together to modulate a single column of air, reducing non-linear harmonic distortion. The added mass of the rear cone/surround assembly also reduces free air resonance.
Tang Band's W5-2053 5" RBM mini subwoofer features extensive venting on the rear cone, voice coil former, and back plate to keep the large, overhung, neodymium-powered voice coil cool. A bumped back plate allows for momentary moments of over-excursion without damage. Additionally, it offers low distortion frequency response that reaches down to 35 Hz.
Product Details | |
|---|---|
| Brand | Tang Band |
| Model | W5-2053 |
| Part Number | 264-953 |
| UPC | 848864015071 |
| Unit of Measure | Each |
| Weight | 5.9 |
Product Specifications | |
|---|---|
| Nominal Diameter | 5" |
| Bolt Circle Diameter | 6.625 |
| Moving Mass Of Diaphragm (Mmd) | 39.92 |
| Power Handling (RMS) | 40 Watts |
| Power Handling (MAX) | 80 Watts |
| Impedance | 4Ω |
| Frequency Response | 35 to 800Hz |
| Sensitivity | 80dB 2.83V/1m |
| Voice Coil Diameter | 1.5" |
Thiele-Small Parameters | |
|---|---|
| Resonant Frequency (Fs) | 35Hz |
| DC Resistance (Re) | 3.6Ω |
| Voice Coil Inductance (Le) | 0.19mH |
| Mechanical Q (Qms) | 4.64 |
| Electromagnetic Q (Qes) | 0.36 |
| Total Q (Qts) | 0.33 |
| Compliance Equivalent Volume (Vas) | 0.14ft³ |
| BL Product (BL) | 9.31T·m |
| Maximum Linear Excursion (Xmax) | 8mm |
| Surface Area of Cone (Sd) | 75cm² |
Materials of Construction | |
|---|---|
| Cone Material | Poly Composite |
| Surround Material | Rubber |
| Basket / Frame Material | Polymer |
| Magnet Material | Ferrite |
Mounting Information | |
|---|---|
| Overall Outside Diameter | 5.9375" across the flats, 7.125" |
| Baffle Cutout Diameter | 5.09" |
| Depth | 3.62" |
| # Mounting Holes | 4 |
Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity suggestion) | |
|---|---|
| Sealed Volume | 0.03ft³ |
| Sealed F3 | 84Hz |
| Vented Volume | 0.07ft³ |
| Vented F3 | 50Hz |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category