Encore 1/8" (3.2mm) Smooth

• Minimum to moderate resistance to stretch.
• Can be used for single-surface splinting or stretched circumferentially.

• Maximum drape. Excellent conformability and reproduction of detail.
• Turns translucent when thoroughly heated and retains its clarity for the first few minutes of molding, allowing visibility of landmarks and bony prominences.

• 100% memory.
• Will regain its original cut shape and size every time it is reheated.
• Encore™ can be used to make a variety of orthoses, providing firm to lightweight support from the hand to the foot.
• Turns translucent when warm.

• Moderately rigid splints.
• If a more flexible splint is required, simply stretch the material to achieve the desired rigidity and thickness.

• Traditional coating has a tacky surface that helps hold the splint in place during molding.
• Pieces pinched together can be pulled apart once cooled.
• Use only dry heat and firm pressure to bond firmly; use solvent to form a permanent bond.

• Resists fingerprinting for a smooth, shiny surface. To remove marks and bring out shine, dip in warm water or lightly heat the surface with dry heat.

• Use 1/8" Encore™ for thumb, finger and hand splints, bases for dynamic splints and burn splints. It is also ideal for lower extremity splints, circumferential leg splints, foot drop splints and foot orthoses.
• Use 3/32" Encore™ for hand and wrist splints, arthritis splints, circumferential splints and burn splints. It is also ideal as a base for smaller dynamic outriggers.
• Lightweight 1/16" Encore™ is ideal for pediatric and finger positioning splints.

• Allows three to five minutes to form and harden after softening in 160° F (71° C) water.

• Hazmat: None
• Latex: None
• HCPCS*: None

Encore™ 1/8" (3.2mm) Smooth

Encore™ 1/8" (3.2mm) Perforated 1%

Encore™ 1/8" (3.2mm) Perforated 19%

Encore™ 3/32" (2.4 mm) Smooth

Encore™ 3/32" (2.4mm) Perforated 12%

Encore™ 1/16" (1.6 mm) Smooth

Encore™ 1/16" (1.6mm) Perforated 12%

Encore™ 1/16" (1.6mm) Perforated 13%