skip to footer block
MIS STANLEY 5546 12 Thread Repair Kit M12X1.75 Metric P3605526MIS-HE5546-12 https://cdnimages.opentip.com/full/MIS/MIS-HE5546-12.jpg STANLEY 5546 12 Thread Repair Kit M12X1.75 Metric Thread Repair Kit Type Metric Coarse Kit Content (1) Tap, (1) Installation Tool, (6) Packaging Insert Packaging Type Carded Drill Size 31/64 Inch Tool Type 2 Size M12 X 1.75 Millimeter Length 18 Millimeter Used On Cylinder Head Bolt, Drain PlugHeli-Coil Has All You Need In Metric Thread Repair Items. Available From Stock Are Metric Coarse Kits In Sizes M3 Through M20 And Metric Fine Kits In Sizes M8 Through M20. All Metric Kits Contain A Heli-Coil Tap, Installation Tool, A Quantity Of Inserts And Complete Instruction.Part Number: 5546-12Unspsc: 27112810Specification Order Part Number HE5546-12 Item Desc THREAD REPAIR KIT M12X1.75 METRIC MANUFACTURER LONG NAME Stanley Black & Decker, Inc. / Stanley Engineered Fastening (Heli-Coil) ADDITIONAL INFORMATION Drill Size 31/64 Inch; Tool Type 2; Size M12 x 1.75 Millimeter; Length 18 Millimeter; Used On Cylinder Head Bolt, Drain Plug MANUFACTURER PART NUMBER 5546-12 Product Group Id HE00 Country of Origin CN Harmonization Code 82051000 Bin Code EG224 Default Selling Unit KIT Catalog Pages(s) 3605526 025964120250 0.5000lbs 0.00 0.00 0.00
STANLEY
42.9200 2025-05-04 Only 2 left In Stock
customer review - by , July 7, 2017
5/ 5stars
I used these in a drill press rebuild project to repair the handle spindle. The old threads were striped out and the previous owner epoxied the old handles back into the spindle. This worked great. I would buy them again.
customer review - by , July 7, 2017
5/ 5stars
Really pleased with the outcome of this kit. I stripped a bolt hole on a Brembo brake caliper and this kit worked great to repair it. Was able to drill the hole straight with the suggested Vermont American 31/64 drill bit in a hand drill with the caliper in a vise. Cleaned the hole and sprayed Remington Gun Oil I had on hand as a lubricant for the tap. I ran the tap down using a 12 point 11mm socket, quarter turn at a time then reverse it slightly, slow but threads cut perfect. Then cleaned it out again with brake cleaner to get the oil out the threads so the Loctite has a clean surface to adhere to. I coated the newly cut threads with Loctite, Then using a 12pt 10mm socket over the Helicoil insert tool I threaded the coil down until flush with the top and broke off the bottom tab. I let that setup for 24 hours then installed my brake caliper with the original bolt no problem, about 80lb/ft of torque and the insert didn't budge and is holding strong.
customer review - by , February 2, 2017
5/ 5stars
Worked great! Can't miss product if you need it.
customer review - by , January 1, 2017
5/ 5stars
Saved the day! Steel bolt in aluminum knuckle on 12 year old car from New England equals thread galling... This Heli+-Coil kit saved me over $500 for a new part.
customer review - by , June 6, 2016
5/ 5stars
perfect fit, fast delivery
customer review - by , February 2, 2016
5/ 5stars
I used this kit on my 2004 Jeep Grand Cherokee to fix a stripped out bolt. This kit does require the purchase of a drill bit that is usually listed in the "items purchased together" tab, as it does not come included with one. I followed instructions I read on an online forum and this kit worked great! It ended up being much easier than I had anticipated. I do recommend using some thread locker on the insert to make sure it doesn't move. I didn't have any issues with it, just sort of a preventative measure. Overall this kit worked great!
  »  
  »  
  »  
  »  
  »  

STANLEY 5546-12 Thread Repair Kit M12X1.75 Metric, Price/KIT

stars Rating 5 | 6 reviews
Brand STANLEY
Shop more from MIS
UPC: 025964120250
SKU: MIS-HE5546-12
Price: $42.92
Quantity:
Only 2 left In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Price is for KIT.

  • Thread Repair Kit
  • Type Metric Coarse
  • Kit Content (1) Tap, (1) Installation Tool, (6) Packaging Insert
  • Packaging Type Carded
  • Drill Size 31/64 Inch
  • Tool Type 2
  • Size M12 X 1.75 Millimeter
  • Length 18 Millimeter
  • Used On Cylinder Head Bolt, Drain Plug


Heli-Coil Has All You Need In Metric Thread Repair Items. Available From Stock Are Metric Coarse Kits In Sizes M3 Through M20 And Metric Fine Kits In Sizes M8 Through M20. All Metric Kits Contain A Heli-Coil Tap, Installation Tool, A Quantity Of Inserts And Complete Instruction.

Part Number: 5546-12

Unspsc: 27112810

Specification



warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Product Warranty

Most Air and Power tools have a 90 days to one year warranty. Hand Tools are usually lifetime-abuse voids warranty.

Return Policy

The wearable safety items, like golves, masks, respirators, etc, are non-returnable.

Note

This product is not eligible for coupon code discount, for we've been offering the best price in the market.
Need more information?
Our staff are available to answer any questions you may have about this item
Request More Information

Look Similar Items By Category

Industrial & Scientific > Power & Hand Tools > Industrial Hand Tools > Wrenches > Hand Wrenches
Tools & Home Improvement > Power & Hand Tools > Hand Tools > Wrenches
Automotive > Tools & Equipment > Hand Tools > Wrenches
Customer Reviews
5 out of 5
see all 6 reviews
5 stars
6
4 stars
0
3 stars
0
2 stars
0
1 stars
0
Write a Review
By arcorabin
Date: July 20, 2017
I used these in a drill press rebuild project to repair the handle spindle. The old threads were striped out and the previous owner epoxied the old handles back into the spindle. This worked great. I would buy them again.
Rating: 5 stars [5 of 5 Stars!]
By Boudin
Date: July 07, 2017
Really pleased with the outcome of this kit. I stripped a bolt hole on a Brembo brake caliper and this kit worked great to repair it. Was able to drill the hole straight with the suggested Vermont American 31/64 drill bit in a hand drill with the caliper in a vise. Cleaned the hole and sprayed Remington Gun Oil I had on hand as a lubricant for the tap. I ran the tap down using a 12 point 11mm socket, quarter turn at a time then reverse it slightly, slow but threads cut perfect. Then cleaned it out again with brake cleaner to get the oil out the threads so the Loctite has a clean surface to adhere to. I coated the newly cut threads with Loctite, Then using a 12pt 10mm socket over the Helicoil insert tool I threaded the coil down until flush with the top and broke off the bottom tab. I let that setup for 24 hours then installed my brake caliper with the original bolt no problem, about 80lb/ft of torque and the insert didn't budge and is holding strong.
Rating: 5 stars [5 of 5 Stars!]
By frmrradiodjSHAY
Date: February 22, 2017
Worked great! Can't miss product if you need it.
Rating: 5 stars [5 of 5 Stars!]
By Ken M
Date: January 01, 2017
Saved the day! Steel bolt in aluminum knuckle on 12 year old car from New England equals thread galling... This Heli+-Coil kit saved me over $500 for a new part.
Rating: 5 stars [5 of 5 Stars!]
By D. Thomas
Date: June 16, 2016
perfect fit, fast delivery
Rating: 5 stars [5 of 5 Stars!]
By Justin Hubbard
Date: February 02, 2016
I used this kit on my 2004 Jeep Grand Cherokee to fix a stripped out bolt. This kit does require the purchase of a drill bit that is usually listed in the "items purchased together" tab, as it does not come included with one. I followed instructions I read on an online forum and this kit worked great! It ended up being much easier than I had anticipated. I do recommend using some thread locker on the insert to make sure it doesn't move. I didn't have any issues with it, just sort of a preventative measure. Overall this kit worked great!
Rating: 5 stars [5 of 5 Stars!]
Items 1 - 6 of 6 reviews
 1