skip to footer block
CED Switchcraft W SC S1029 Washer Switchcraft S1029 shoulder for insulating panels P7254077CED-W-SC-S1029 https://cdnimages.opentip.com/full/CED/CED-W-SC-S1029.jpg Switchcraft W SC S1029 Washer Switchcraft S1029 shoulder for insulating panels Manufacturer Part Number: W-SC-S1029Switchcraft shoulder washer for 3/8\" bushing. Perfect for insulating metal bushings from the chassis, use with W-SC-S1028. Minimum chassis hole diameter of 0.44\" required to accommodate the shoulder.This washer, along with W-SC-S1028, is for insulating jacks with metal bushings from the panel. The inside of the panel needs to be insulated as well as the outside of the panel. However - the inner edge of the hole also needs to be insulated.This shoulder washer\'s shoulder passes through the inside of the panel hole, insulating the flat part of the panel and the inner edge. The corresponding flat washer (W-SC-S1028) is used to insulate the flat part of the panel on the other side. If the panel is thick enough, two shoulder washers can be used. To fully insulate, you would normally use one shoulder washer and one flat washer on the opposite side. See the \"Insulation Guide\" diagram below for an illustration of this layout.Measurements and Specs Chassis Hole Diameter0.44 in. Depth0.025 in. Inner Diameter0.386 in. Item Height0.065 in. Outer Diameter0.622 in. Thickness0.04 in. Packaging Dimensions0.621 in. × 0.621 in. × 0.065 in. Weight (Packaging)0.001 lbs. Files DimensionsAll Models Insulation GuideAll Models 7254077 0.0200lbs 0.00 0.00 0.00
Switchcraft
1.38 2025-05-05 In Stock

Switchcraft W-SC-S1029 Washer - Switchcraft, S1029, shoulder for insulating panels

Brand Switchcraft
Shop more from CED

SKU: CED-W-SC-S1029
Price: $1.38
Buy in bulk & save 19% ($1.12 each)
Quantity:
In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk
Price: $1.38 ea X 1 qty = $1.38
Quantity Price Save
1+ $1.38 0%
25+ $1.26 9%
100+ $1.12 19%
This item is excluded from use of other offer, discount or coupon.

Product Description

Manufacturer Part Number: W-SC-S1029

Switchcraft shoulder washer for 3/8" bushing. Perfect for insulating metal bushings from the chassis, use with W-SC-S1028. Minimum chassis hole diameter of 0.44" required to accommodate the shoulder.

This washer, along with W-SC-S1028, is for insulating jacks with metal bushings from the panel. The inside of the panel needs to be insulated as well as the outside of the panel. However - the inner edge of the hole also needs to be insulated.

This shoulder washer's shoulder passes through the inside of the panel hole, insulating the flat part of the panel and the inner edge. The corresponding flat washer (W-SC-S1028) is used to insulate the flat part of the panel on the other side. If the panel is thick enough, two shoulder washers can be used. To fully insulate, you would normally use one shoulder washer and one flat washer on the opposite side. See the "Insulation Guide" diagram below for an illustration of this layout.

Measurements and Specs




Files

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item


Customer Reviews
0 reviews
Be the first to review this item!