0 reviews
Be the first to review this item!
Product Description
Manufacture part number: W563587044
Firestone QuickPrime Plus is designed to clean and prime Firestone PondGard EPDM Pond Liners and Firestone 45 mil EPDM Pond Liners prior to the application of:
This product requires Haz-Mat Shipping and cannot be shipped UPS Next-Day Air, Second-Day Air or Three-Day Select
See the
Firestone EPDM Accessory Instructions in the Reference Section for Installation Details.
Firestone QuickPrime Plus Method of Application
Epdm Pond Liner and other surfaces to be primed must be clean, dry, free of foreign materials and excess dusting agent. Clean with broom or rags if necessary.
Stir QuickPrime Plus throughly before and during use. QuickPrime Plus must be applied with a QuickScrubber or QuickScrubber Plus pad and handle using long back and forth strokes with moderate-to-heavy pressure along the length of the area until surfaces become gray in color with no streaking or puddling. Allow the QuickPrime Plus to flash off completely according to the touch-push test (usually less than 10 minutes, flash off time will vary depending on ambient air conditions) before apllying QuickSeam products or Lap Sealant. Complete QuickSeam product or Lap Sealant application in accordance with Firestone Specialty Products specifications and details.
Firestone QuickPrime Plus Coverage Rate
Approximately 50- 100 square feet per gallon one side. Coverage rates for various are as follows:
Firestone QuickPrime Plus is designed to clean and prime Firestone PondGard EPDM Pond Liners and Firestone 45 mil EPDM Pond Liners prior to the application of:
- QuickSeam Cover Strip
- QuickSeam Splice Tape
- QuickSeam FormFlash
- QuickSeam Pipe Flashing
- QuickSeam Joint Covers
- QuickSeam Corner Flashing
This product requires Haz-Mat Shipping and cannot be shipped UPS Next-Day Air, Second-Day Air or Three-Day Select
See the
Firestone EPDM Accessory Instructions in the Reference Section for Installation Details.
Firestone QuickPrime Plus Method of Application
Epdm Pond Liner and other surfaces to be primed must be clean, dry, free of foreign materials and excess dusting agent. Clean with broom or rags if necessary.
Stir QuickPrime Plus throughly before and during use. QuickPrime Plus must be applied with a QuickScrubber or QuickScrubber Plus pad and handle using long back and forth strokes with moderate-to-heavy pressure along the length of the area until surfaces become gray in color with no streaking or puddling. Allow the QuickPrime Plus to flash off completely according to the touch-push test (usually less than 10 minutes, flash off time will vary depending on ambient air conditions) before apllying QuickSeam products or Lap Sealant. Complete QuickSeam product or Lap Sealant application in accordance with Firestone Specialty Products specifications and details.
Firestone QuickPrime Plus Coverage Rate
Approximately 50- 100 square feet per gallon one side. Coverage rates for various are as follows:
- 3" QuickSeam Seam Tape: 100-150 linear feet/gallon
- 6" QuickSeam Cover Tape: 100-150 linear feet/gallon
- 9" QuickSeam Tape: 50-100 linear feet/gallon
| Item # | Description |
| W56RAC1695 | Firestone Quick Prime Plus Quart |
| W563587041 | Firestone Quick Prime Plus 1 Gallon |
| W563587044 | Firestone Quick Prime Plus 3 Gallon |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item