skip to footer block
JEN Jensen Swing S175H Hanger only for S175 P5929527JEN-S175H https://cdnimages.opentip.com/full/JEN/JEN-S175H.jpg Jensen Swing S175H Hanger only for S175 Hanger only for the S175 swing seat. Sold as pair.This seat is for children 5-12 year olds only. Not for Adults. Adults should supervise children at all times. Do not allow children to stand on seat or use unsafely. Do not allow it to be used if damaged.IMPORTANT: To keep children safe from harm, follow these precautions and instructions when installing, using, or maintaining this playground equipment. Installation: Make sure when seat is installed the warning label is visible.Our parts are sold as either replacement parts or components of a set, unless you are buying our Metal Frame Set, therefore these parts need to be installed according to the sets installation instructions.To assemble take hardware out of bag and put the two washers on the top of the seat. Then put the hanger on top of washers, if needed use a hammer to insert through the holes, then flip the seat over and attach nuts and tighten past the lock nut. You will need to connect S-hooks or shackles from the triangular hardware on the seat to the chain and then S-hooks or shackles from the chain to the swing hangers. The seats need to be not more than 2 ft off the ground. Hangers need to be spaced 2 ft from the end of the set and 2 ft apart for each swing. You will need to make sure the S-hooks are closed to within .04 to meet ASTM safety standards. To do this you will need to use our S-hook pliers or a regular pair of channel lock pliers. WARNING: Once the S-hooks have been opened they will have to be replaced to avoid injuries from coming open and/or breaking. Make sure that the shackles used are tightened and if you use the shackle swing hangers for the chain that these also are tightened. Inspect regularly or use Loctite® to make sure bolt is still tight.Maintenance: Do monthly routine maintenance checks for cracks, rust, missing rivets, open S-hooks or evidence of vandalism such as cutting, metal showing through the material or children standing on seats and crushing or bending the seats. Also tighten any loose nut or bolts. Make sure there are no exposed footings, anchoring devices, rocks, roots, holes or any other obstacles in or around playground equipment. This will reduce serious injuries. In high use areas these inspections should be done more frequently. Clean with mild soap and water when you do the monthly maintenance checks.Any damage from vandalism, abuse or misuse VOIDS all warranties. Weight (lbs) 3.65 Dimensions (in) 20 X 16 X 2 in 5929527 5.0000lbs 2.00 16.00 20.00
Jensen Swing
110.3500 2025-05-10 335 In Stock

Jensen Swing S175H - Hanger only for S175

Brand Jensen Swing
Shop more from JEN

SKU: JEN-S175H
Price: $110.35
Quantity:
Shipping:
$18.29 To [ 43215 ] Estimated Delivery Date: May 17, 2024 to May 21, 2024
335 In Stock
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Hanger only for the S175 swing seat. Sold as pair.

This seat is for children 5-12 year olds only. Not for Adults. Adults should supervise children at all times. Do not allow children to stand on seat or use unsafely. Do not allow it to be used if damaged.

IMPORTANT: To keep children safe from harm, follow these precautions and instructions when installing, using, or maintaining this playground equipment.

Installation: Make sure when seat is installed the warning label is visible.

Our parts are sold as either replacement parts or components of a set, unless you are buying our Metal Frame Set, therefore these parts need to be installed according to the sets installation instructions.

To assemble take hardware out of bag and put the two washers on the top of the seat. Then put the hanger on top of washers, if needed use a hammer to insert through the holes, then flip the seat over and attach nuts and tighten past the lock nut. You will need to connect S-hooks or shackles from the triangular hardware on the seat to the chain and then S-hooks or shackles from the chain to the swing hangers. The seats need to be not more than 2 ft off the ground. Hangers need to be spaced 2 ft from the end of the set and 2 ft apart for each swing. You will need to make sure the S-hooks are closed to within .04 to meet ASTM safety standards. To do this you will need to use our S-hook pliers or a regular pair of channel lock pliers. WARNING: Once the S-hooks have been opened they will have to be replaced to avoid injuries from coming open and/or breaking. Make sure that the shackles used are tightened and if you use the shackle swing hangers for the chain that these also are tightened. Inspect regularly or use Loctite® to make sure bolt is still tight.

Maintenance: Do monthly routine maintenance checks for cracks, rust, missing rivets, open S-hooks or evidence of vandalism such as cutting, metal showing through the material or children standing on seats and crushing or bending the seats. Also tighten any loose nut or bolts. Make sure there are no exposed footings, anchoring devices, rocks, roots, holes or any other obstacles in or around playground equipment. This will reduce serious injuries. In high use areas these inspections should be done more frequently. Clean with mild soap and water when you do the monthly maintenance checks.

Any damage from vandalism, abuse or misuse VOIDS all warranties.

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item


Customer Reviews
0 reviews
Be the first to review this item!